PoE Splitter - 30W

PoE Splitter - 30 Watts

Features

  • IEEE802.3af / 802.3at compliant* *Compliant to all IEEE802.3af specifications except the higher current up to 700mA. Presents class 0 PD to PSE.
  • High efficiency flexible "wide band" design peak up to 88%. over 80% from 5W to 30W output load on input voltage from 36V to 57V.
  • One splitter for both low power or high power
    Flexible "wide band" design operates efficiently with any IEEE802.3af or 802.3at Power Supply. Regular or higher power.
  • Choice of output voltage models 12V, 15V, 18V, and 24V DC available.
  • Compact and lightweight design.
  • Accurate output line voltage load regulation.
  • 1500V isolation barrier for safety.
  • Full protection.
    Input under voltage or over voltage, output over current and short circuit. Output can permanently short without damage.
  • Supports 2 pair or 4 pair power extraction.
    Extracts power from either data pair (1,2,3,6) or spare pair (4,5,7,8) or both pairs. PoE signature on any one pair.
  • RoHS Compliant.
  • 10/100/1000 (Gigabit) Ethernet support.
  • Diagnostic LED indicators.
    Input DC power and PoE good on, output power on.

Applications

  • Remote IP Phones.
  • IP Telephones / VoIP Video Streaming Telephones.
  • Wireless Access points / WiMax™ Infrastructure.
  • Bluetooth Access points.
  • Remote IP Data Loggers.
  • PTZ Security IP Cameras / Video Surveillance.
  • Point of Sale (POS) terminals / IP Print Servers.
  • Small Notebook Computers / Thin Clients.

 

Input
Input Voltage

36V to 57V DC (for higher power operation an input voltage of 51V or higher is recommended) Extracts power from either data pair (pins 1,2,3,6) or spare pair (pin 4,5,7,8) or both pairs

Input Current

600mA maximum continuous as per draft IEEE 802.3at

PD Detection

Presents IEEE802.3af PD signature and Class 0 classification to PSE on any one pair

Ports

RJ45 shielded connector for PoE Input

Output
Output Voltage (±3%)


12V 13.5V 15V 18V 21V 24V

Output Current (RMS)

2.75A 2.44A 2.2A 1.83A 1.57A 1.37A

Output Power
Dependent on input voltage

27 Watts maximum continuous. 30 Watts maximum.
Maximum output power is determined by the input (voltage and current). Current IEEE 802.3at standard permits 0.6A maximum input current. 30 Watts output possible by exceeding IEEE current limits to a maximum 0.75A

Regulation (typical)

± 3%

Ripple

< 100mV p-p (at DC Jack)

Efficiency
End to end

≈ 85% (at 24W load at 51V input, 12V model)

Ports

RJ45 shielded connector for Data Out
Centre positive barrel 5.5mm x 2.5mm for DC Out

Isolation

1500V Isolation between input and output

Indicators

PoE detection and classification
Output Power
Output power LED will blink in the event of an output overload and switch off.

Environmental
Operating Ambient

-20 to 50°C (-4 to 122°F)
Any power device such as this splitter produces heat and requires de-rating to operate at ambient temperatures over 30°C (86°F). The plastic case is not suitable for outdoor operations at higher ambient conditions.

Storage

-20 to 65°C (-4 to 149°F)

Humidity

5% to 85% RH

Safety and Compliance
EMI and EMC
Immunity

FCC Class B Part 15 and EN55022 (CISPR 22) Class B
ESD : EN61000-4-2
RS : EN61000-4-3
CS : EN61000-4-6

 

PoE Splitter 30W
Click To Enlarge
  • Item #: PD-30W
  * Marked fields are required.
Qty*
Price $59.00

Similar Items

Accessories